News

Shaft seals ring/Combined seals ring/Combined seals, SPNO Seals

Update:2017-01-14

DSH Seals product code,  SPNO

Pressure, 35MPa

Speed, 1.5（m/s）

Temperature, -55/+255

Material, PTFE/ NBR/PKM

Medium, Hydraulic oil, water, flame retardant, gas

Application,  Excavator seal, standard cylinder seal, mobile hydraulic seal, oil seal

What are the seal storage conditions? Seals as one of the sealing parts,it is the most widely used in different industries,and the large quantities for usage.

Some companies will reserve some of the most commonly used seals to prepare for the urgent need, the most worrying thing is the seals preservation environment.

And what are the storage conditions of seals?If the seals is not good, it will cause a lot of waste.

The following specific look at the seals which storage conditions, in order to better preserve the seals.

1.Avoid high temperature, the storage room temperature at or below 30 degrees Celsius is the best, to avoid high temperature aging seals;

2. To avoid air, dust, seals must be stored in a sealed package, to avoid contact with the water or dust in the air;

3.Avoid strong light, the seal must avoid the strong light to avoid the seal by the air ozone erosion or early aging.

A variety of sealing performance factors are different, such as mechanical seal (packing seal, etc.) factors affecting temperature, medium, wear, pressure and so on.

DSH Seals has a good and strict control of the Seals storage, we only offer high performance to our customers, welcome to contact us.

Thanks for your attention.